Then, I used a pattern from One Song Needle Arts to do these placemats. The pattern has cross-hatching built right into the sides of it. It's easy to decide how large to make your placemats by using the following method:
Open the pattern on your screen in Creative Studio, and use a grid to see the size of the central area. You can use a grid of 1-inch to make the pattern size easy to measure. Decide if you want to adjust the pattern up or down a little bit after studying it on your grid. I cut three strips of fabric 1 1/2 inches wide, and pieced them together for each side. The inner square was cut 14 1/2 inches wide. After piecing the placemat, I basted it to my batting and backing on the machine. Using the head of the machine, I placed a p2p line on the exact edge of my center section of the pieced placemat. I then marked this line as sewn -- this is very important to do so your line doesn't stitch. You can then tweak the design on the screen to line up perfectly with your edges of the center section by sizing with the handles of the design. Click on start, and your design will stitch exactly where you need it to be. Add your binding while you still have the placemat on the machine, and then all you have to do is hand-sew it to the back. Very quick and easy!